Careers
Download Center
Contact

Language

de
en
us
uk
nl
es
fr

Products
- Mass finishing Technology
  - Circular vibrators
    - From deburring and rounding to high-gloss polishing, circular vibrators can be used anywhere.
    - CB circular vibrators
    - CD circular vibrator
    - CM circular vibrators
    - MV multivibrators
    - CF circular vibrators
    - AM Multivibrators
  - Centrifugal disc finishing units
    - Centrifugal disc finishing units have an abrasive action that is ten times stronger than that of circular vibrators. This helps remove heavy burrs and round off edges on small and medium workpieces.
    - TT...A/2C centrifugal disc finishing unit
    - TT...B centrifugal disc finishing unit
    - TT...SM centrifugal disc finishing unit
  - Process water technology
  - Continuous units
    - Our continuous units can be installed to continuously process your workpieces in the production process. The individual parts are added to the mass finishing machine in cycles, without interrupting the process.
    - AV unit
  - Trough vibrators
    - If your workpieces are too large for circular vibrators, simply process them individually in the trough. Sensitive parts can be secured or processed in separate chambers.
    - TFM vibrators
    - TMV vibrators
  - Dryers
    - After mass finishing, workpieces are generally wet or moist and must be dried. This is done using either a heated drying medium or hot air, depending on your individual needs.
    - G-series vibration dryer
    - BF-HL belt dryer
    - DLT drum dryer
  - Drag finishers
    - High-value, delicate work pieces with complex shapes or work pieces made from tough, difficult to machine materials are mounted to special fixtures and dragged through a stationary bed of grinding or polishing media. Since the work pieces never touch each other during the process, they cannot scratch or nick each other.
    - M-TMD
  - Drums and rotating barrels
    - Drums and rotating barrels are the cost-effective solution for processing small workpieces – such as those in precision mechanics – in small and medium batch sizes. They are also suitable for fine finishing and polishing.
    - E5 mini barrel
    - Rotating barrels
  - Process media
    - The right combination of process media can ensure the perfect processing results. Ceramic and plastic abrasive media, combined with compounds and special media, create the ideal surface.
    - Plastic abrasive media
    - Compounds
    - Ceramic abrasive media
    - Special media
    - Flocculant compounds
  - Accessories
    - Our wide range of accessories can help you adjust circular vibrators, trough vibrators, continuous units and all other processing systems to your individual requirements, and help you improve your processes.
    - Separation units
    - Workpiece handling
    - Protective devices
- Blasting technology
  - Our belt transport system gently circulates your workpieces as they are continuously transported through the machine and blasted evenly from all sides. This saves you time and money.
  - THM continuous belt blasting unit
- Small part coating
  - One or two automatic spraying units quickly and efficiently coat your plastic, elastomer, metal or wooden small parts using water or solvent-based paint or varnish. These units can also be flexibly expanded for standard and special solutions.
  - Rotamat R 60
  - Rotamat R 80
  - Rotamat R 85
- Process media
  - The right combination of process media can ensure the perfect processing results. Ceramic and plastic abrasive media, combined with compounds and special media, create the ideal surface.
  - Plastic abrasive media
  - Compounds
  - Ceramic abrasive media
  - Special media
  - Flocculant compounds
- Process water technology
  - Centrifuges
  - Flocculant units
- Dryers
  - After mass finishing, workpieces are generally wet or moist and must be dried. This is done using either a heated drying medium or hot air, depending on your individual needs.
  - G-series vibration dryer
  - BF-HL belt dryer
  - DLT drum dryer
- Accessories
  - Our wide range of accessories can help you adjust circular vibrators, trough vibrators, continuous units and all other processing systems to your individual requirements, and help you improve your processes.
  - Separation units
  - Workpiece handling
  - Protective devices
- Cleaning technology
  - Free your components of dirt and grease within 20 to 40 minutes with the right combination of cleaning media, detergent and water. Even larger dirt particles are removed.
  - TRT 83 x 37 cleaning trough
- Cutlery cleaning
  - Cutlery cleaning units
    - Our cutlery cleaning units let you clean 1,250 to 5,000 items of cutlery per hour quickly, thoroughly and efficiently. Ideal for non-food caterers and tabletop leasing companies.
    - BRA 900/1200/2500
  - Consumables
    - To make sure your cutlery is thoroughly cleaned and dried, we also supply detergent, drying granulate and polishing media made in our own production facility.
    - trowaclean BRS 20 detergent
    - trowapol GTM 300 drying granulate
    - BPS polishing media
Industries
Processing
Company
Press
Service
Contacts

Products
Industries
Processing
Company
Press
Service
Contacts

X

Contact form How to reach us Direct call

Startpage > Company > Trade fairs > Detail

12. June 2023

GIFA 2023

15th International Foundry Trade Fair

Date: 12 - 16 June 2023

Venue: Messe Düsseldorf

hall 5 - exhibition stand D15

To the trade fair website

Back

Products
Industries
Processing
Company
Press
Service
Contacts

© 2023 Walther Trowal GmbH & Co.KG

Facebook
YouTube
Xing
LinkedIn
Twitter

Sitemap
Data protection
Flag
Terms and conditions

Necessary cookies

Show details Hide details

Necessary cookies

Imprint | Datapolicy