With the BF-HL belt dryer, you can dry your workpieces using hot air without any physical contact. This process is particularly suitable for delicate parts that must not come into contact with one another, for workpieces with narrow bores, and for long and bulky components.
The workpieces are continuously transported through a heated drying tunnel on a fine-mesh wire belt – optionally made from high-quality V4A stainless steel. The temperature and belt speed can be adjusted continuously. A high-pressure air knife is available as an option to blow away residual water prior to the drying process, as is an extension of the conveyor belt for more convenient loading and unloading.
- Infinitely adjustable operating temperature
- Infinitely variable conveyor belt speed
- Low energy consumption thanks to generous thermal insulation (> 100 mm)
- Tight-fitting safety lid
- Special version: Conveyor belt extension
| Model | 350/3300 | 600/3500 | 1000/3500 |
|---|---|---|---|
| Belt width x length (mm) | 380x3,000 | 600x3,200 | 1,000x3,200 |
| Tunnel clearance height (mm) | 330 | 430 | 530 |
| Conveyor belt speed (m/min.) | 0.5–3.0 | 0.5–3.0 | 0.5–3.0 |
| Operating temperature (°C) | 140 | 140 | 140 |
| Blower power (kW) | 4.0 | 5.5 | 2×5.5 |
| Heating power (kW) | 20.7 | 33.6 | 41.4 |
| Connected load (kVA) | 28 | 42.5 | 57.5 |
| Unladen weight (kg) | 1,150 | 1,340 | 1,800 |
We would be happy to advise you personally on your specific application
Your point of contact for mass finishing technology
Our experts in machinery and consumables will find the right solution for your specific application! Please feel free to get in touch directly or use the contact form.
Bruno Andreas Barbeitos Helfrich
H.J. Helfrich Comércio e Equipamentos Lda
h.j.helfrich@sapo.pt
